SKU: N/A Category:
Have a question about this product?
Contact Us

Header Specs:
This header is available in any tube size up to 2” with a 3 ½” collector, stepped or not.
All of our headers are hand made so we can make them for any engine deck height and for any aftermarket cylinder head. All of the tubes are inside the frame with excellent ground clearance.

What Fits:
We used a Milodon oil pan #30900 to design with and the bottom of the header was ¼” higher than the bottom of the pan. (The header will work with many different oil pans with kick out sumps). Measuring from the side of a stock oil pan we have over 4” of room on the driver side and on the passenger side at mid way down the pan we have 2 ¼” of room and at the bottom 3” of room for kick out sumps. The Milodon oil pan we used has a 1 ½” sump kick out and we could still get the oil filter out from the bottom.
This header is designed for either straight or angled spark plugs. The spark plugs have good clearance. This header requires a Nippondenso style mini starter. We used a Power Master #9500 or #9540 to design with. A full size GM starter and a Hitachi style mini starter will NOT fit.
The header is designed for the engine in the stock location on stock motor mounts or Moroso #62500 solid motor mounts, but will not fit a mid plate. It will fit clutch linkage and a power brake booster, but will not fit factory air conditioning or column shifter linkage.
We offer Power Master #9540 starters.

Installing the Headers:

Pro-Tour Style: When the header is built in the Pro-Tour style (all one piece) it is difficult to install and should be held in place as the engine is installed.
Race Style: If the header is built in the Race style with individual tubes install one tube at a time from the bottom starting from front to back. You may have to raise the engine on the driver side to get #3-#5 pair installed past the steering column. Then install the collectors. In the Race style this header can be fitted with larger collectors or our collector mufflers.

Refer to our (Header Installation Tips) page for additional information.

Thank you for selecting Lemons Headers!
If you have any questions give us a call at 805-239-8998.

Additional information


Mild Steel, Stainless Steel