Lemons Header Logo

Home

Product List
Apparel
Price List
Customers Cars
FAQ's
Install Tips
Contact Us
 
Product List

LEMONS HEADERS INC.
’73-’87 CHEVY PICK UP 4X4 BB
PART # BBPU-4X
4


PART # BBPU-4X4

click the images to see a larger size photo


Header Specs:

This header can be made in any tube size up to a step header of 2 1/8” stepped to 2 ¼” with up to a 4” collector. It is hand made so we can make it for any deck height and for any cylinder head. All tubes are inside the frame. The bottom of our design header was ½” below the bottom of our oil pan. Spark plug access is excellent. We have room for oil pan sump kick outs, on the driver side we have 4 ½” of room at the bottom of the pan and on the passenger side we have 1 ¾” of room. If the oil pan kick out is under the oil filter it will be trapped.
This header will fit stock motor mounts or motor plates. The steering column has good room and there is room for a power brake booster, but this header was not designed for clutch linkage or column shifter linkage.
The header shown in our photos was built as individual tubes with slip on race collectors which makes it very easy to install.

Installing with Individual Tubes:

On the driver side install #1, then #3, then #7, then #5. Only snug the header bolts until the collector has been installed then tighten all bolts.
On the passenger side install #2, then #4, then #8, then #6.
If the header is built as all one piece then it should be installed as the engine is installed.

Thank you for selecting Lemons Headers!
If you have any questions give us a call at 805-239-8998.
Dan Lemons

Note: Our products do not come coated. They come either with a bare metal shop finish or a high temperature black paint.

Back to the Product List
Home | Product List | Apparel | Price List | Customer Cars | FAQ's | Install Tip | Policies | Contact Us
Lemons Headers Online. Copyright © 2000-2004 Lemons Headers. All Rights Reserved.
Website maintained by WebIQ Media. www.webiqmedia.com